The CP4.2 pump problem: LML Duramax and 6.7 Power Stroke
Why the Bosch CP4.2 high-pressure pump fails, why one failure usually means a whole fuel system, which trucks are affected, and what that means for buying used fuel parts.
The Bosch CP4.2 is the high-pressure fuel pump on the 2011–2016 LML Duramax and on the 6.7 Power Stroke from 2011. It is the main reason LML owners shop for fuel parts, and it changes how you should think about buying anything used for these trucks.
What goes wrong
The pump's internal parts depend on diesel fuel for lubrication. When the fuel is contaminated, low in lubricity, or carries air, the moving parts can wear and come apart. Air in the pump is the cause shops mention most, often from a fuel filter that was not sealed or primed properly after a change.
When a CP4.2 fails, it usually does not fail alone. Metal from the pump is pushed downstream into the rails, lines and injectors. A repair that replaces only the pump often ends with a second failure, so shops usually quote the whole high-pressure system: pump, injectors, rails, lines, and a tank and line cleaning.
Which trucks
| Truck | Engine | Years | How exposed |
|---|---|---|---|
| Silverado and Sierra 2500HD/3500 | LML Duramax | 2011–2016 | The most failures reported. No electric lift pump from the factory. |
| Ford Super Duty | 6.7 Power Stroke | 2011 onward | Fewer failures reported. Ford uses an electric lift pump, which shops credit for the difference. |
The earlier Duramax engines (LB7 to LMM) and the 6.7 Cummins in most model years use the older CP3 pump, which has a better record. That is why used CP3 pumps hold their value.
What this means when you buy
- Used LML injectors are only as good as the truck they came from. If that truck's pump failed, its injectors were exposed to the same debris. Ask why the set was removed.
- A used CP4.2 is a gamble on a part with a known failure pattern. Most owners who replace one choose a new pump or a conversion instead.
- A used LML engine should come with the history of its fuel system. An engine whose pump failed and was repaired properly, with receipts, can be a better buy than one that never had the work done.
The CP3 conversion
A popular fix on the LML is to replace the CP4.2 with a CP3 using a conversion kit. At least one kit sold for the LML carries a California Air Resources Board executive order (EO D-756), which makes it legal on the road in all 50 states. Kits that do not carry an EO number may not be legal in your state; check before you buy.
See current prices for used CP3 pumps and LML injector sets.